Concept The version 2 test circuit uses the Arduino Nano shield. This test circuit has two 200 ohm resistors in series with the LEDs, two
After testing 3 data logging devices, we came to a conclusion on which design we would like to implement into the final prototype MROC vehicle.
Getting Ready The first step is to download the Arduino IDE software. The software is attainable at https://www.arduino.cc/en/software After accepting the terms and conditions and
Concept This data logger design is tested by using an Arduino Uno, DS3231 Real Time Clock (RTC) module, an SD card module, and a temperature/humidity
Overview Christian Brothers University partnered with the University of Tennessee Health Science Center on the Go Baby Go project. UTHSC For this project, the University
CBU Student Branch of IEEE
